Chimney Systems

Chimney Systems

Twin wall insulated multi-fuel system chimney

Therminox is a high quality, multi-fuel, stainless steel twin wall system chimney designed for use with all solid fuel, wood, coal, gas, oil and pellet heating appliances. It is ideally suited for operating temperature up to 450°C and comes with a 10 year Axa backed guarantee.

All of the products offered by Cheminées Poujoulat have been rigorously tested in every configuration by the CERIC Laboratory to ensure they meet highest standards (Building Regulation Document J - Amendements to Approved Documents).

The Therminox system chimney is available as TI with a bright stainless steel outer case, and ZIoffering better value for internal use.  Also, it can be powder painted to any RAL colour of your choice or can be ordered with a copper outer case.

It comes with a wide range engineers components making the installation of the chimney even much easier than usual.

With Joint Seals, Therminox can also be used under positive pressure when connected to a condensing boiler.

CE marking: 0071-CPD-0011

Designation: T450 N1 W V2 L50040 G50 - T250 N1 W V2 L500040 O20 - T200 P1 W V2 L50040 020 (with Joint Seals).

 

 

Twin wall insulated Chimney systems
Twin wall insulated Chimney systems

Chimney Systems

Pre-fabricated ridge mounted & gable end chimney stack

This model is a working chimney inside an aesthetic stack. Available in many models and different finishes meeting the demands of your project and environment.

Available in a various range of finishes ( brickslip, roughcast, smoothcoat), The Zenith Chimney Stack comes complete with a pre-installed section of  Therminox ZI twin wall insulated chimney system. Our twin wall insulated system chimney is CE marked and designated as suitable for use with all gas, oil, pellet and wood burning appliances. Complete with a comprehensive range of standard accessories to suit all applications. It is ideally suited for operating temperature up to 450°C and comes with a 10 year Axa backed guarantee.

Our range of pre-fabricated chimney stacks can generally be installed in less than an hour without the need of any structural work to the roof trusses. The chimney stack unit is lightweight and is easily man handled into position without the need of heavy lifting equipment or carnage.

It comes complete with a designed flashing for the roof that ensures the finished construction does not leak. No additional on-site flashings or up-stands are required.

 

CE marking:  0071-CPD-0011
Designation:  T450 N1 W V2 L50040 G50 - T250 N1 W V2 L500040 O20 - T200 P1 W V2 L50040 020 (with Joint Seals)

ridge mounted chimney stack
preformed chimney stack

Chimney Systems

ASCENTOR CHIMNEY STACK

Pre-fabricated mono-pitch chimney stack

The Ascentor models are a working chimney inside an aesthetic stack. Available in many models and different finishes meeting the demands of your project and environment.

Available as square or rectangular, with a various range of finishes ( brickslip, roughcast, smoothcoat), our Ascentor Chimney Stack comes complete with a pre-installed section of Therminox ZI twin wall insulated chimney system. Our twin wall insulated system chimney is CE marked and designated as suitable for use with all gas, oil, pellet and wood burning appliances. Complete with a comprehensive range of standard accessories to suit all applications. It is ideally suited for operating temperature up to 450°C and comes with a 10 year Axa backed guarantee.

Our range of pre-fabricated chimney stacks can generally be installed in less than an hour without the need of any structural work to the roof trusses. The chimney stack unit is lightweight and is easily man handled into position without the need of heavy lifting equipment or carnage.

To ensure a weather tight roof, our chimney stacks come complete with a designed flashing suitable for most of the roofing materials and roof pitches.

 

ridge mounted chimney stack
Twin wall insulated Chimney systems
preformed chimney stack

Chimney Systems

 
 

Pumice is a natural insulator; this is the unique property that separates pumice from all other chimney material. Schiedel Isokern is noteworthy for its flue & chimney products manufactured using high quality pumice which is recognised throughout Europe and USA.

The Natural properties of Pumice

 

·    High Insulation Properties
Pumice is a natural insulator, able to maintain the temperature of flue gases in comparison to other products which allow the temperature to fall.

·    Lightweight
Pumice is strong yet lightweight allowing one person to lift and build the chimney units.

 

·    Resistant to temperature change
Pumice expands and contracts less with temperature change than other chimney systems. This reduces the possibility of cracking and structural damage that can occur with other products.

Pumice chimney sYSTEM
CHIMNEY SYSTEMS PUMICE